SATA Interface


Advantech SQFlash industrial storage modules support SATA interface SSD with multiple form factors including with 2.5" SSD, mSATA, M.2, DOM, CFast, Half-Slim, etc. with wide temperature support.

  • SQF-S10 630


    Advantech SQFlash CFast combines the advantages of flash disk technology with the Serial ATA III interface, which electrically complies with the Serial ATA International Organization Standard. CFast, consisting of a SATA-based 7-pin standard interface for data segment and 17-pin for power and controller segment comes with a wide range of capacities from 1GB to 64GB for SLC and 4GB to up to 128GB for MLC, which delivers the read / write performance up to 500MB/s and 150MB/s.


  • SQF-S25 630


    Advantech SQFlash 630 series 2.5” SATA SSD delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface, fully compliant with standard 2.5” SATA SSD form factor. The SQF-S25 is based on the 2.5” SATA SSD form factor which is generated by JEDEC and could provide a wide range capacity from 1GB to 64GB for SLC, 2GB to up to 64GB for Ultra MLC, and 4GB to up to 128GB for MLC. Also it can reach more than 480MB/s read as well as 180MB/s write high performance even based on MLC flash. The power consumption of Flash Disk is also much lower than traditional Hard Drive.


  • SQF-S25 830


    Advantech SQFlash 830 series 2.5” SATA-SSD (SQF-S25 830) delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface, fully compliant with standard 2.5-inch form factor. The SATA SSD is based on a standard SATA 7-pin interface for data segment and 15-pin for power segment, designed to operate at a maximum operating frequency of 300MHz with 30MHz external crystal. Its capacity could provide a wide range up to 2TB. Moreover, it can reach up to 550MB/s read and 530MB/s write high performance based on Toggle 2.0 MLC flash (with 512MB DDR enabled and measured by CrystalDiskMark v3.0).


  • SQF-S25 910S


    SQFlash Enterprise Class SATA III (6.0Gbps) 2.5" SSD


  • SQF-SDM 630


    Advantech SQFlash SATA DOM combines the advantages of flash disk technology with the Serial ATA III interface, which electrically complies with the Serial ATA International Organization Standard. SATA DOM, consisting of a 7-pin standard SATA interface for mounting on motherboard directly comes with a wide range of capacities from 1GB to 64GB for SLC and 4GB to up to 128GB for MLC, which delivers the read / write performance up to 500MB/s and 150MB/s.


  • SQF-SHM 630


    Advantech SQFlash Half-size mSATA combines the advantages of flash disk technology with the Serial ATA III interface, which electrically complies with the Serial ATA International Organization Standard. Half-size mSATA, consisting of a Half-size Mini PCIe form factor with SATA signal pins comes with a wide range of capacities from 1GB to 64GB for SLC and 4GB to up to 128GB for MLC which delivers the read / write performance up to 250MB/s and 150MB/s.


  • SQF-SLM 630


    Advantech SQFlash 630 series SATA Slim delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface, fully compliant with standard SATA Slim form factor. SQF-SLM is based on the SATA Slim form factor which is generated by JEDEC and could provide a wide range capacity from 1GB to 64GB for SLC and 4GB to up to 128GB for MLC which delivers the read / write performance up to 480MB/s and 180MB/s.


  • SQF-SM8 830


    SQFlash Enterprise Class SATA III (6.0Gbps) M.2 2280 SSD


  • SQF-SMS 630


    Advantech SQFlash 630 series mSATA delivers all the advantages of Flash Disk technology with the Serial ATA III (6.0Gb) interface, fully compliant with standard mSATA form factor. The SQF-SMS is based on the mSATA form factor which is generated by JEDEC and could provide a wide range capacity from 1GB to 64GB for SLC and 4GB to 256GB for MLC which delivers the read / write performance up to 480MB/s and 180MB/s.


Get Quote